Structural Pallet Racking is highly recommended in warehouses that have a fast-paced environment, such as large cold storage facilities, beverage distributors, food handling warehouses, or any high volume storage warehouses. Structural Racks can endure much greater impact from forklift equipment and offer more pounds per square inch.

Roll-Formed Pallet Racking is recommended for retail stores, commercial and industrial warehouses storing lighter weight products with less fork truck interaction. Roll-formed rack is less expensive than structural rack, and this lower cost provides a more up-front return on investment, still providing the strength necessary for most applications.

Cantilever Racking offers efficient, organized storage of longer, oddly sized materials. Available in a wide variety of sizes and capacities, standard and heavy-duty cantilever racks present an assortment of storage solutions. Choose from a variety of styles for simple installation, low maintenance and rugged operation.

Pallet Flow Racking is a high-density storage system that functions as first in, first out. This system works well for time-sensitive products and a limited number of SKUs. Pallets are loaded from one side and gravity rollers transport them down to the picking side. On systems over three pallets deep, a braking system is typically provided.

Push Back Racking is a high-density storage solution that allows greater selectivity than drive-in pallet racks. Push Back is a last-in, first-out system, but multiple SKUs can be stored since each lane and level are accessed independently. Push Back systems can be designed to store up to six pallets in depth and multiple levels vertically.

Drive-In Pallet Racking is a high-density storage solution that works well with food or product manufacturer that have a limited number of product SKUs. Drive-In requires standardized pallets and works as LIFO (last in, first out). Drive-In rack typically has a lower cost than other high density systems such as Push Back and Pallet Flow.

A semi-automated, high-density storage system, Radioshuttle allows maximum use of warehouse space, maintains selectivity between all levels and increases operational efficiency.

Available in medium and heavy duty, warehouse guard rails protect your pallet racking, storage structures and other important areas from damage by warehouse equipment. These guard rails are rated for 10,000 lb impacts at 4 mph and are available for 18" or 43" tall posts with all necessary hardware included.

These space-saving rack protectors are installed at the end of rack aisles. The unique design allows you to install the guards around the rack legs, saving you space especially where driving lanes are tight. The low-profile guard also saves space on your first pallet position. These rack protectors are ideal when space is limited.

Build-A-Rail Guard Rails from Handle-It are heavy duty, customizable and easily assembled to protect property from damage due to impact. Build rail systems one, two or three rails high by just stacking rail units one on top of the other and can be coupled together to make runs as long as you want. Available in 4, 6, 8 and 10 ft lengths.

HDPE Plastic Column Protectors are designed to easily install around your warehouse columns and provide impact protection from fork truck traffic. They are highly visible and add a protective barrier around the column should an impact occur. The HDPE plastic construction is lightweight with long-lasting durability.

Upright Post Rack Protectors and Shallow Profile Column Guards are designed to deflect impacts from forklifts, pallet jacks and pallets while they are being moved in and out of the rack bays. Rack protectors snap onto standard 3'x3' rack uprights, and Column Guards come in a variety of standard and special order custom heights.

Floor-Mounted Barriers provide reinforced protection that is mounted flush to the floor. The flush design that is 12'' tall keeps product and forks from pushing through into pedestrian walkways or protected equipment. These barriers provide double the height of protection compared to typical guide angles.

The Damo Pro and Damo Can are used to repair and reinforce damaged front columns. Each comes with a lifetime warranty against impact, is designed to fit on any type of racking system and can accommodate multiple levels of beams. Damo products respect the original configuration of the rack while restoring the loading capacity.

Download the Product Guide

The Damo Deflex plate protects uprights from side impacts and abuse in drive-in tunnels as well as end-of-aisle applications. It is installed on the side of either a Damo Pro or Damo Can. The Damo King is used on new racking systems to further protect uprights and prevent damage from impact and abuse to the lower part of the frame.

Download the Product Guide

The Damo Guard and Super Guard look simple, but looks can be deceiving. These well-engineered guards prevent damage on front columns, eliminate possible side twisting and fit on any type of rack. They're an efficient way to protect the most critical part of your upright: the first 24 inches. 36” & 48” options are available.

Download the Product Guide

The Damo Guide is used for narrow aisle entry configurations. It helps lift trucks follow a defined path, away from uprights. The Damo End Guard is used to protect end of aisles against traffic damage. Both are adaptive in length to fit specific needs and are made of 3/8" thick angle iron with stiffeners to increase impact resistance.

Download the Product Guide

The Damo Pallet Stopper is used to protect walls or back frames against pallet impact at floor level and has a standard length of 24”. The Damo Rail Stopper is used to protect walls and back frames against pallet impacts at rail level. Both are made of 3/8" thick angle iron. Other colors and galvanized finish are available.

Download the Product Guide

Our wire mesh decking solutions are designed to provide additional safety for pallet rack applications throughout your warehouse or fulfillment center. We offer a number of brands and products for a variety of different uses; everything from light-duty shelving to heavy-duty racks. Contact our team to discuss your needs.

Wire partitions are used in warehouses and manufacturing facilities for tool cribs, equipment cages and general storage areas. Standard configurations are two, three or four sided with an entry door to the caged area. Doors can be equipped with key locks, keypads, card readers, fingerprint scanners, push bars and more.

Industrial rolling carts are perfect for retail and commercial applications. They can provide a safe alternative to hand trucks and light-duty pallet jacks when picking orders in the warehouse and replenishing shelves on the sales floor. Available in a variety of configurations with optional shelves. Pictured: WorldCart™ from WWMH

We offer a variety of wire containers, including: folding, light duty, bulk, pallet surround and more. All of the stock containers we offer have 4-way entry for easy use with forklifts, convenient drop gate design for easy access to products and safety rating plates with static load capacity and static load height.